Pre-engineered steel buildings for warehouses, factories, and industrial sheds — designed, fabricated, and installed across Pakistan.
MA Engineering Solutions builds pre-engineered steel structures for industrial, commercial, and agricultural projects across Pakistan. Every building starts with structural engineering matched to your site conditions and operational needs, then moves through in-house fabrication, transport, and on-site erection — one team, one point of contact, from first drawing to final handover.
We’ve delivered projects for warehousing, textiles, chemical processing, pharmaceuticals, dairy, and light manufacturing — each with different load requirements, clearances, and cladding needs. That variety shapes how we design: not around a standard template, but around what the building actually has to do.
Wide clear-span storage with fast turnaround for logistics operations
• Key Benefit: Wide-span storage capacity
• Features: Quick installation & low maintenance
Heavy machinery, tough environments, high structural loads
• Key Benefit: High structural strength
• Features: Durable & weather-proof
Hygienic, moisture- and pest-resistant space for fast-moving goods
• Key Benefit: Optimized for fast logistics
• Features: Moisture & pest resistant
Scalable manufacturing floors with energy-efficient design
• Key Benefit: Custom dimensions available
• Features: Energy-efficient design
Unobstructed spans for assembly lines and heavy-load equipment
• Key Benefit: Maximum usable floor space
• Features: Heavy-load bearing capacity
Controlled airflow and dust protection for fabric and looms
• Key Benefit: Dust and weather-proof
• Features: Superior airflow & temp control
Corrosion-resistant, ventilated builds to industrial safety standards
• Key Benefit: Anti-corrosive materials
• Features: Safe & ventilated environment
Airtight, sanitation-ready environments with temperature control
• Key Benefit: Airtight & contamination-free
• Features: Easy to sanitize and maintain
Fast-assembly, relocatable structures for exhibitions and events
• Key Benefit: Premium look & feel
• Features: Easy relocation & fast setup
Durable flooring and natural light for maintenance and repair work
• Key Benefit: Durable flooring support
• Features: Ample natural light integration
Architectural finishes with customizable display-ready facades
• Key Benefit: Premium architectural finish
• Features: Customizable front facades
Bio-secure, well-ventilated builds for livestock and produce
• Key Benefit: Optimal airflow & natural light
• Features: Weather-resistant & hygienic
A pre-engineered building (PEB) is a steel structure whose main components — columns, rafters, purlins, girts, and bracing — are designed and fabricated in a factory before being shipped to site for assembly. Instead of building up steel piece by piece on location the way conventional construction does, most of the precision work happens in a controlled shop environment, and the site work is largely assembly.
That shift matters for three reasons: speed (less on-site fabrication means shorter build timelines), accuracy (factory tolerances are tighter than field-cut steel), and efficiency (members are engineered for the loads they’ll actually carry, not oversized as a safety margin). It’s why PEB has become the standard choice for warehouses, factories, and large-span industrial buildings across Pakistan and globally.
From PEB design and engineering to steel fabrication, manufacturing and installation, we deliver complete, reliable building solutions tailored to your project requirements.
We look at your land, intended use, and load requirements before anything gets drawn. A shed for cold storage racking carries different structural demands than one for a textile floor — the process starts by understanding which one you're building.
Our engineers size the primary frame, secondary members, roof pitch, and bracing system to your building's spans, height, and site wind/seismic conditions.
You review and approve detailed fabrication drawings before a single piece of steel is cut — this is where dimensions, openings, and connection details get locked in.
Columns, rafters, purlins, girts, and connection plates are manufactured to spec in our facility, with dimensional checks at each stage.
Every batch is checked against the approved drawings before it leaves the shop — welds, bolt-hole alignment, coatings, and finished dimensions.
Components are organized and transported to your site, sequenced for efficient erection.
Our own installation crews — not subcontracted labor — assemble the frame, roofing, and wall cladding on site.
Final walkthrough against the agreed scope, with as-built documentation for your records.
In-house fabrication. We manufacture structural components ourselves rather than outsourcing — which means tighter control over quality and schedule.
Our own erection crews. The team that designs your building isn’t handing installation off to a third party we don’t oversee.
Engineering-first approach. Design starts from load calculations and site conditions, not a catalog template resized to fit.
Nationwide project support. We’ve completed work in Lahore, Islamabad, Rawalpindi, and other industrial centers, with logistics planned around each site’s access and transport constraints.
| PEB Structures | Conventional Construction | |
|---|---|---|
| Fabrication | Factory-built, shipped for assembly | Steel cut and assembled on-site |
| Typical timeline | Faster — less on-site fabrication | Longer — more sequential site work |
| Clear-span capability | Large open spans standard | Often requires more internal columns |
| Steel efficiency | Sized to calculated load | Frequently over-specified |
| Future expansion | Can be planned into original design | Depends on original structural capacity |
There’s no flat per-square-foot rate that applies across every project — cost depends on the specifics of what you’re building. The main factors:
Because these variables shift the cost significantly, we don’t quote a blanket rate — we review your actual project details and return a specific estimate.
A steel building made from components engineered and fabricated in a factory, then assembled at the project site — as opposed to steel cut and built up entirely on location.
PEB shifts most fabrication work into a controlled factory environment, which typically shortens on-site build time. Conventional construction involves more sequential work happening directly at the site.
Yes — span, height, roof configuration, wall systems, insulation, and openings are all specified to the project, not selected from a fixed template.
Yes. Wide clear-span capability without internal columns is one of the main reasons PEB is the standard choice for warehouse construction.
Yes — design, fabrication, delivery, and erection are all handled by our own team, not subcontracted separately.
Often, yes, if expansion is planned into the original structural design. Feasibility depends on the existing frame, foundation, and how much additional load the extension would add — worth flagging at the design stage if it's a possibility.
Yes — we support projects across Pakistan, including Islamabad, Rawalpindi, Faisalabad, and other industrial centers, with logistics scoped per site.
Send us your project location, approximate building dimensions, intended use, and any drawings you already have. Our engineering team will review and come back with a tailored recommendation and estimate.
MA Engineering Solution is Pakistan’s leading manufacturer of PEB structures, sandwich panels, prefab buildings, cold storage, porta cabins, and industrial steel solutions.
Product
Contact
